Analogman ARDX20 Dual Analog Delay (Flat Box) - Mint Condition

Description

Analogman ARDX20 Dual Analog Delay (Flat Box) - Mint Condition
This delay was designed for ease of use and the best sound possible, with standard features everyone can use, but optional external features for things everyone may not want to pay for up front. The external options like tap tempo, modulation, and presets is an additional AMAZE0 pedal with a computer in it to control this delay.
It's trivial to make an analog delay that has very dark repeats, as the noise which is the problem with analog delays is filtered out along with the high end. To make the repeats have good fidelity without excessive noise (like the Deluxe Memory Man) is difficult, especially with the newer low voltage delay chips, but we have tuned this delay for high fidelity repeats and kept the noise very low. If you want less high end there are ways to get that (which also reduce noise).
FEATURES
1. True bypass switching, the right side foot switch is effect ON/OFF.
2. It's ONE delay pedal, but has TWO sets of controls, not only delay time but also delay level and feedback.
YELLOW channel (upper 3 knobs) or RED channel (lower 3 knobs) are selected with the left foot switch.
3. Battery or normal 9V boss type power. Power jack in the center top.
4. Battery compartment on the bottom for quick and easy battery changes (round version).
5. Low power consumption, 15mA, so an alkaline battery should last about 30 hours of use.
6. Jacks are on the top of the pedal for efficient layout on pedalboards
7. Input jack on the far right, unplug to disconnect battery
8. Output jack on the far left
9. EFFECTS LOOP is next to the input jack. Use a Y-cable (insert cable like optional HOSA STP-201) to run an effect only when the delay is ON, and only on the delayed signal.
The dry sound will stay in the pedal, it won't pass through the effects loop.
Modulation pedals are cool here. The E-H FREEZE pedal is amazing in the loop!
Or use a VOLUME pedal with a Y-Cable, or an expression pedal to control the level of the repeats. Pulling back all the way will kill the delay sound. You can also control the FEEDBACK somewhat, as lowering the repeats volume will reduce the feedback so you can easily control infinite delays.
10. DELAY TIME EXPRESSION jack is next to the output jack. Use a normal 10K Boss EV5 type expression pedal to control the delay time of the RED channel. This jack is also used for external options (AMAZE1) including tap tempo, modulation, multiple delay time preset boxes, etc.
This delay was designed for ease
On Sep-17-21 at 14:25:38 PDT, seller added the following information:
Shipping to USA only
On Sep-17-21 at 14:37:11 PDT, seller added the following information:
Shipping to USA only