Knife Maker's Center Line Scribe, Edge Scribe, 2 x 72 Knife Maker's Scribe

Description

This is a USED Knife Maker's Center Line Scribe. This scribe uses 2 high quality, abec 3, deep groove radial ball bearings. The body is made of 1/2" X 1/2" square 1018 steel stock and is approximately 2-1/2" long. The kit includes everything in the plastic bags. Which is the steel body, 2 bearings, 2 washers, 1 brass thumb screw, 1 nicely ground sharpened carbide rod. The spacing between the bearings when assembled is approximately .282 (9/32") so this will easily scribe 1/4" stock. This unit will scribe any thickness stock from zero up to and including 1/4" thick. You rotate the scribe on the work until the bearings touch on each side. This is a self centering design.
Has a few marks and dings, function is perfect.
The tungsten carbide rod is approximately 1-1/2" long X approximately 1/8" diameter.
One end has a slight chamfer and the other end has been
professionally
ground to a sharp 60 degree point.