-40%
Radial Electrolytic Capacitors, 0.1uF to 6800uF, 6.3V to 450V - Lot of 3
$ 3.14
- Description
- Size Guide
Description
Lot of 3, Radial Electrolyticcapacitors from various
manufacturers i.e. RUBICOM, ILE, NICHICON, SPRAGUE, SHOEV, ICC, TSW, AEROM,
NIPPON,
etc
. Our selection is from 0.1u
F to 6800uF and these have
6.3V to 450V DC
operating
voltage and are 20%
tolerance
parts (see individual values). The picture shows some different package/manufacturers for electrolytic capacitors. You will get three identical capacitors of your chosen value at a given operating voltage, temp and tolerance.
Please Note : Lead
spacing's
vary between 3mm to 25mm, ideal for matrix through-hole PCB's, the larger capacitance values are
likely
"snap-in" type which generally require a custom PCB. If you want specifics on pin spacing or a
manufacturer
, please
message
us.
A
n electrolytic capacitor is a polarized capacitor whose anode or positive plate is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the capacitor. Because of their higher capacitance values, electrolytic capacitors are most often used in lower-frequency applications such as in power supply filters. The high capacitance values typically associated with electrolytic capacitors act as shorts or low impedance lines for RF (Radio Frequency) and higher-frequency applications.